Precautions for the use of fiber optic transceivers | Fiberwdm.com

 There are many different classifications of fiber optic transceivers, and in actual use, most of the attention is paid to the categories that are distinguished by different fiber connectors: SC connector fiber optic transceivers and FC/ST connector fiber optic transceivers. When using fiber optic transceivers to connect different devices, you must pay attention to the different ports used.

​

1. Connection of fiber optic transceiver to 100BASE-TX equipment (switch, hub):

Make sure that the length of the twisted pair cable does not exceed 100 meters; connect one end of the twisted pair cable to the RJ-45 port (Uplink port) of the fiber optic transceiver, and the other end to the RJ-45 port of the 100BASE-TX device (switch, hub) (Ordinary mouth).


2. Connection of fiber optic transceiver to 100BASE-TX equipment (network card):

Make sure that the length of the twisted pair is no more than 100 meters; connect one end of the twisted pair to the RJ-45 port (100BASE-TX port) of the fiber optic transceiver, and the other end to the RJ-45 port of the network card.


3. Connection of fiber optic transceiver to 100BASE-FX:

Make sure that the length of the optical fiber does not exceed the distance provided by the equipment; one end of the optical fiber is connected to the SC/FC/ST connector of the fiber optic transceiver, and the other end is connected to the SC/ST connector of the 100BASE-FX device. Another thing that needs to be added is that many users think that when using fiber optic transceivers, as long as the length of the fiber is within the maximum distance supported by single-mode fiber or multi-mode fiber, it can be used normally.


We specializes in manufacturing all types of Optical Transceiver,40g Optical Transceiver,200g Optical Transceiver and related products.  We sincerely invite your attention to take a look at our wide range of products.

评论

发表评论

此博客中的热门博文

What is 25G SFP28 optical transceiver | www.fiberwdm.com

  The 25G Ethernet solution is a solution standardized and developed by the IEEE 802.3 working group P802.3by. This solution is mainly used in the data center environment. The 25G Ethernet Alliance was established in July 2014 to support the deployment of single-channel 25GB/s solutions and dual-channel 50GB/s Ethernet solutions. The 25GB Ethernet Alliance was completed in September 2015. In November 2015, the 802.3 working group was established to develop a single-channel 25 GB/s Ethernet solution. On June 30, the IEEE 802.3by standard was approved by the IEEE-SA Standards Committee. The FiberWDM 802.3by standard defines the following technologies: Single channel 25 GB/s 25GBASE-KR PHY for printed circuit backplanes. PHY is a chip, an abbreviation for the physical layer of the OSI model； Single channel 25 GB/s 25GBASE-CR-S PHY for 3 m twinaxial cable (in-rack) Single channel 25 GB/s 25GBASE-CR-L PHY for 5 m twinaxial cable (between racks)  ； Single channel 25 GB/s for 100 m O...
阅读全文

Why Choose a 40-Channel DWDM Multiplexer/Multiplexer | www.fiberwdm.com

图片
 DWDM (Dense Wavelength Division Multiplexing) is an ideal optical multiplexing technology for long-distance data transmission, which can put multiple channel information using a single wavelength on the same fiber and greatly improve the transmission capacity of optical networks. At present, DWDM technology is widely used in telecommunication networks and has become the choice of many telecommunication operators. Since the inception of DWDM, various devices and techniques have been used to enhance the high performance of each component in the DWDM network. DWDM multiplexers and demultiplexers are the main devices responsible for multiplexing and demultiplexing data sources. DWDM multiplexers and demultiplexers have been rapidly upgraded over the past few years to overcome insertion loss and meet the growing demand for faster telecommunications, and they are consistently used by today's vendors (also known as DWDM multiplexers) are combined in one rack. As a serious optical communi...
阅读全文

MEMS optical switch Supplier | FiberWDM

图片
  MEMS optical switch   is a machine-type optical switch manufactured based on micro-nano technology,It uses the mechanical structure of micron size to realize the highway and switching of optical signal in the fields of optical fiber communication and optical fiber sensing.It can switch the optical signal from one input fiber to the other, enabling the reconfiguration of the optical path. Flexible and dynamic optical connection in the reliability and capacity of the network. Compared with other optical switching technologies, MEMS optical switch has several advantages :   Fast response speed :  The mechanical part of the MEMS optical switch has a fast response speed, which can complete the optical signal switch at the nanosecond level. Low insertion loss and high stability :    the optical part uses optical fiber for optical signal transmission, with low insertion loss and high stability. High reliability :    MEMS optical switch is manufactured ...
阅读全文