瑞东电子

  Fiber optic transceivers  usually have the following basic characteristics: 1. Provide ultra-low latency data transmission. 2. It is completely transparent to the network protocol. 3. A dedicated ASIC chip is used to realize data line-speed transmission. Programmable ASIC concentrates multiple functions on one chip, and has the advantages of simple design, high reliability, and low power consumption, which can enable equipment to obtain higher performance and lower cost. 4. Rack-type equipment can provide hot-swappable functions for easy maintenance and uninterrupted upgrades. 5. The network management equipment can provide functions such as network diagnosis, upgrade, status report, abnormal situation report and control, and can provide a complete operation log and alarm log. 6. Most equipment adopts 1+1 power supply design, supports ultra-wide power supply voltage, and realizes power supply protection and automatic switching. 7. Support an ultra-wide operating temperature ...

  There are many different classifications of   fiber optic transceiver s , and in actual use, most of the attention is paid to the categories that are distinguished by different fiber connectors: SC connector fiber optic transceivers and FC/ST connector fiber optic transceivers. When using fiber optic transceivers to connect different devices, you must pay attention to the different ports used. ​ 1. Connection of fiber optic transceiver to 100BASE-TX equipment (switch, hub): Make sure that the length of the twisted pair cable does not exceed 100 meters; connect one end of the twisted pair cable to the RJ-45 port (Uplink port) of the fiber optic transceiver, and the other end to the RJ-45 port of the 100BASE-TX device (switch, hub) (Ordinary mouth). 2. Connection of fiber optic transceiver to 100BASE-TX equipment (network card): Make sure that the length of the twisted pair is no more than 100 meters; connect one end of the twisted pair to the RJ-45 port (100BASE-TX port) of t...